The Quick-Qube pop-up frames have a patent pending hanging bar structure that can support 150kg of weight! Here is a guide to how to put these together.
Quick-Qube 1224 & Quick-Qube 1530
Here is the Hanging Bars structure:
1. For each of the 4 Outer Support Poles, insert the crook end into the central slots.
2. Then match the hole at the other end of the Outer Support Pole to the hole in the corner of the frame. Use one of the screws provided to fix into place. A screwdriver will help!
3.Finally add the hanging bars in position
Quick-Qube 2030
Here is the Hanging Bars structure:
1. For each of the 4 Outer Support Poles, insert the crook end into the central slots.
2. Then match the hole at the other end of the Outer Support Pole to the hole in the corner of the frame. Use one of the screws provided to fix into place. A screwdriver will help!
3. Next locate the 2 Cross Support Arms. Take one of these Arms and slot one crook (the end of the Arm) into the central slot and the other crook (at the end of the Arm) into the second central slot. Repeat with the second Cross Support Arm.
4. Finally add the hanging bars in position.
Quick-Qube 240 & Quick-Qube 2030 & Quick-Qube 300
Here is the Hanging Bars structure:
1. For each of the 4 Outer Support Poles, insert the crook end into the central slots.
2. Then match the hole at the other end of the Outer Support Pole to the hole in the corner of the frame. Use one of the screws provided to fix into place. A screwdriver will help!
3. Next locate the 2 Cross Support Arms. Take one of these Arms and slot one crook (the end of the Arm) into the central slot and the other crook (at the end of the Arm) into the second central slot. Repeat with the second Cross Support Arm.
4. Finally add the hanging bars in position.